EMA Plastic Weld Glue Cement Glue For Hard To Stick Plastics Weald

Product Information

Diecast – Explore Our Range of Diecast Models At Scale Model Shop, we supply a wide range of diecast models, specialising in aircraft, cars, and tanks. Diecast models are a miniature replica made using a die casting or metal casting method. They are usually made of zinc or lead alloy and come fully formed in a single piece which portrays the vehicle in a smaller scale. Diecast models are much more than a simple toy, they demonstrate a higher level of quality than other plastic kits, due to the higher shelf life. This is great for any enthusiast collector as you can display for years and pass it down to the next generation. It doesn’t matter if you’re just starting out or have been collecting for years, there is no denying how appealing a diecast model collection is. Browse through our range of brands available, including Corgi, Diecast Masters, and Greenlight – there is plenty to choose from! If goods are returned as faulty, generally we will provide a replacement. If the item is of a ‘ready to go’ type model eg. For professional quality painting of structures, it is recommended that, when possible, construction of the main components be completed and painted assembled. Paint sub-assemblies and other detail parts before attaching to the main structure. Use solvent cement sparingly during final assembly so paint will not run. ABS has been hailed by professional modelmakers as “the best all-around construction material since wood”. Stronger and more rigid than many metals; easier and more flexible to work with than any previous plastic; cleaner and more durable than wood, ABS structural shapes by PLASTRUCT have been used for engineering design models on an international scale since their introduction. ABS is also one of the best plastics for heat or vacuum forming and, of course, has excellent bonding characteristics, not only to itself but to other commonly used plastics. While certain types of paint adhere better than others on various types of plastic, almost any type of paint may be used. Alkyd oils are probably the best all around paints and are available in flat or satin finishes. Use Floquil brushable paints for painting basswood. The pigment in this paint is specially ground to provide good coverage without hiding detail. Latex paints are only suitable when the surface offers some mechanical bond (matte finish). Water colors and poster paints are not recommended. Lacquers are ideal for ABS and Butyrate but are not compatible with Styrene. Minwax stain is excellent for Basswood. Be sure to pre-stain all parts before gluing as the glue seals the wood and prevents the stain from penetrating. HEAT FORMING

Glue the levels of foam together with the appropriate glue (see our cement guide) and hold in position with nails until the glue dries (allow at least 24 hours). Consider nail placement so they will not affect contour shaping later. to examine the product you must have done so without damaging or marking the product in any way). It should be For best results in landscaping, plant in groups and use different heights of trees to represent varying ages of the trees as well as for creating depth of field. As you move further from the viewing point or higher in the mountains, use shorter trees. Shorter trees may also be used for potted or tubbed trees. We are pleased to provide the following collection of creative tips for working with PLASTRUCT Plastic Model Parts.

Copolyester (also known as P.E.T.G.) is tougher and less prone to split or shatter than Acrylic. It has excellent clarity in sheet form, and is resistant to stress whitening. It is easily formable and not prone to warp. Copolyester is quite stable and bonds well to itself, however with most other plastics, a special industrial grade Cyanoacrylate Glue is recommended. Accepts most paints, including lacquer. Cement Guide The material used in our Traditional Round Tubing medium is Butyrate plastic. It has proven to be ideal because it is so convenient to work with. It can be cut, turned, drilled, painted and easily cemented. The Tubing and Tubing Fittings are manufactured to provide a good friction fit and maintain the outside diameter; splines on the male Fittings accomplish tight fit and prevent undesired rotation and still allow intentional turning. This feature permits cementing to be a final operation. The telescoping sizes of the pipe combined with the workability makes improvisation quite simple. To represent building elevations (floors) or glass panels on glass skyscrapers, scribe the front side (reflective side) of Mirrored Sheet with a hobby knife using a straight edge. Trace the grooves with an ink pen or bullet-tipped marker of the appropriate color until the desired effect is achieved. Professional model makers have used plastics as virtually their sole working material for the past 30 years. However, hobbyists, miniaturists and amateur model builders have, for the most part, continued to use wood, card and brass for their models. There are, of course, applications where those materials are suitable or desirable. But in most cases, Plastruct should be your material of choice. Basic construction of building shells is usually of a rigid material such as Acrylic, Styrene, Foamboard or plywood. Plastruct Plastic Patterned Sheets can then be applied to create realistic simulated finishes.

These plastic sheets are easily cut with a hobby knife or scissors. For sheet application to a substrate surface, a general purpose spray adhesive or our GES-2 Silicone Adhesive is recommended. In some cases, our Plastruct Plastic Weld or Bondene Cements are preferable, however, caution must be taken to ensure proper application; too much solvent cement may melt the plastic sheet. To remove solvent stains from Styrene sheets, use a Pink Pearl eraser or fine steel wool. Butyrate can be lathe-turned in the same manner as brass or Cast Acrylic. Grind the cutting tool to provide chip clearance. The resultant turnings will have a polished surface. This material can also be drilled, tapped, carved or saw cut. Very slow speed is required for machine sanding. ABS hand rails and stair rails may be curved to fit circular applications by softening them in warm water or heating with a hair dryer. Stairs may be modified to fit the circumference of a tank or other curved surface by cutting off the stair stringer from the side to be cemented. Tape the stair in place. Attach each stair step separately.

All Acrylic Rods may be cut using a fine tooth saw blade. Cut ends should be polished using a flame or WET & DRY fine grit sand paper. Bending may be accomplished by carefully softening the Acrylic using a torch flame or electric stove burner. We have found that many of our Plastic Patterned Sheets can be used for hard-to-find or unusual applications. For your assistance, we provide a few below:

When surfaces larger than a single sheet are to be covered, in most cases, the patterns are designed to allow easy and undetected joining of multiple sheets. FINISHING & PAINTINGPaint the foam a color that will be a suitable undercoat for your finished landscape. Use latex or acrylic paint. OR, see our Polyterrain or Magic Earth materials. For PPE, you'll for sure need gloves made of neoprene rubber rather than surgical latex types. It will remove the oils in your skin. And definately goggles for the eyes. Had some spalsh in my right eye one time while working on a plane, and it will make a grown man cry!! lol Ventilation is also a must - got 'happy and giggly' due to it one time with my supervisor one time cleaning another fuel tank where ventilation was an issue. This service does not deliver on a Saturday or Sunday. If you would like Saturday delivery please call us on 01782 409310. You have the right to cancel within 7 working days after the day you take receipt of goods. You must notify us within

this time that you wish to cancel. You are required to take good care of the goods and return them to us at your own Please note many modelers refer to scale as a fraction, while others refer to it as a ratio. For instance, 1/48 is also referred to as 1:48. Both are correct. POPULAR MODELING SCALES HOBBY SCALEEmabond partners with our customers to provide the desired outcome – a cost effective reliable welded assembly. The A-Stand – AMMO presents an exclusive new range of lacquer-based, high- performance paints designed for modelling use. Formulated with ultrafine pigments, A-Stand is a range of professional paints that offers extremely realistic finishes difficult to match by other brands on the market. The A-Stand range offers a complete solution for the modeller: it includes an extensive colour chart of metallic and transparent tones, as well as primers and varnishes. These paints provide perfect results for any modelling subject, whether aircraft, military or civilian vehicles, figures, science-fiction and fantasy, or dioramas, providing a highly durable finish when dry. Why do you need A-Stand? The excellent fluidity of A-Stand products makes them easy to spray without clogging the airbrush. They also provide a tough and durable finish once dry, allowing the application of any other lacquer, enamel weathering products, or acrylic paint on top without issue. A-Stand products dry to the touch in a short period of time of approximately 30 minutes, depending on the amount of paint applied, ambient humidity and temperature. The A-Stand paint series includes various lines of products used to apply a range of effects and finishes on your models. What are the advantages of A-Stand? The range of A-Stand… PS-47 through 59 make excellent industrial vents when modified by adding Styrene Strips to every other slat. They can also be used as window awnings. For the various materials found in PLASTRUCT’s Catalog, the following cements are recommended: STYRENE