Joined in 2023 
82 
63 About this deal
Cheaper brands, such as those you would find in high street bargain stores, will have been mass-produced with lower grade materials which allow the low price tag. Though that may sound good for your bank account, you will soon discover you have a tape measure that slices your fingers, screwdrivers that don’t fit in the cross slot of a screw and a hammer grip that is slipping from the handle. As with any product, when you’re shopping online you’re often given a set of alternative products to consider. These aren’t always the same type of product, but usually products that people are interested in when they’ve bought DeWalt DWE560-GB 1350W 184mm Electric Circular Saw 240V. Circular saws are wonderfully versatile tools, especially when you cut the cables and go cordless. The ideal job for any circular saw is making cross cuts in constructional timber, so I started testing with CLS that measured 37 x 135 mm. The blade that comes with this saw is the DT1209. It’s designed to work specifically with the DCS391 and is optimised for cross cutting. But rip cuts (where you cut along the grain of the wood) are a big part of any challenge, so I also set the saw up to cut along the length of constructional timber using a fence. Finding a trustworthy brand can be a big undertaking, and when you are faced with lots of recommended companies, the search can feel daunting. Some manufactures cater to different areas of the workforce, and not all brands offer all the tools in every field. First, you need to ask yourself if the brand you have chosen can provide you with the tools you need now, and the ones you will need in the future. Of course, you could buy from multiple brands, but that will require more research that takes up valuable time.
At least some of this excellent performance must come down to the 165 mm DT1209 blade. There are 24 TCT teeth that make short work of both soft and hard woods. The finish isn’t the best of all the circular saws I tested out, but it was probably the most effortless to push through the cut. There is a long list of brands that excel in specific tools, but don’t do so well with others. One company that is fantastic across the board is Screwfix. Seeing as this is a blade designed to cut through timber only, I didn’t try it out on any other material. You could probably use it to cut plastics or even soft metals, but it wouldn’t be a fair test of a wood cutting blade. Unboxing this DeWalt DCS391 Circular Saw was quite underwhelming. In comparison with the bright and informative boxes that the Makita or Bosch saws came in, this was a bit disappointing. I know this is sold as a “bare” tool, but a plain cardboard box is as bare as they come! Having tools with excellent durability is extremely important. Not only will it mean you will not have to spend out on replacement tools when they break prematurely, but because tougher tools will do a better job. Sometimes cheaper ones can appear to work great until wear and damage suddenly make them unusable, and you are left unable to complete your task. This will lead to an extended work period as you will have to go out and buy a replacement. If you use that tool as part of your profession, it could mean the difference between hitting your deadline or not. No matter what kind of job you have or how you’re using the equipment, make sure your tools can stand up to the task in the first place.Do not use electric tools in wet conditions unless they are approved for that use. If you must work in wet conditions, always ensure you have good balance and are unlikely to slip.
Make sure you maintain your tools by performing regular maintenance tasks like grinding or sharpening. Remember to follow the manufacturer’s instructions while you’re doing this.When working at heights, never leave tools lying out in the areas where they could present a hazard to the people below. DeWalt have gone down the premium route when it comes to the baseplate. It’s made from cast magnesium, which is light as well as incredibly tough. Magnesium shoes are usually the most expensive option on a circular saw, as it’s lighter than steel and more durable than aluminium. Screwfix has an excellent reputation and is arguably the best brand for trade tools in the UK. This is down to them supplying only top-quality tools at extremely reasonable prices. It’s obvious that the team at Screwfix are passionate about what they do – having friendly and helpful staff that range from online assistants to instore staff. If you are unsure or need any advice on your DIY or trade job, they are more than happy to answer your questions.
US tool brand DeWalt are nearing their 100 th birthday, and in that time, they’ve done a lot for the professional and DIY tool market. Inventing the radial arm saw is just one of their proud achievements, and their range of powerful XR battery powered tools are some of the best on the market.I honestly can’t understand why DeWalt would put the dust extractor where they did. If you’re planning on working indoors with this saw, it’s going to make a mess whether you’re using a dust extractor or not.
The next challenge was on much harder wood. Some English oak timbers I milled up several years ago had dried nicely and proved ideal for pushing this cordless saw a bit harder. I tried out the same test: cuts at 0° free hand and with a roofing square, then set to 45° to force the saw to work a lot harder.
Price
When you are finished using a compression tool like a nail gun, make sure that the pressure is released before you break the hose connections. The problems with the dust extractor placement don’t stop there unfortunately. When plugged into a dust extractor hose, there’s barely enough room left for your hand on the handle! I’m surprised at this design decision as it’s not very user friendly or well thought out. And if you’re a left handed user, it’s virtually impossible. Wear clothing that fits well. Loose clothing or accessories can get caught in a tool’s moving parts, which could result in dire consequences. But what I really don’t like that when you loosen off the fastener, it drops all the way to 50° rather than 45°. It’s good that you can get up to 50°, but you’re much more likely to need a 45° bevel. You need to stop and line it up each time, there isn’t a detent that helps you catch the common bevel angles you might need like 22.5°either. You may have to pay more than the cheaper or disposable options on the market, but you will be thankful if a near miss or accident occurs and it was your PPE that reduced or avoided the injury. Work Boots
Great Deal 
New Comment