You can make a test call to 17771234567, or if you are signed up for one of Callcentric's rate plans you The maximum number of handsets that can be registered to your base station is not affected by the repeater. The repeater can be used to extend the coverage range in all directions, allowing several For the second year till, and including, the fifth year from the End of Life, Yealink will attempt to provide SW bug fixes. In the EOL support phase, a SW upgrade of the product to a newer existing release will also be seen as a fix to the SW bug. Providing a fix may not be possible in some cases due to the limitation of hardware or software architecture, and Yealink in its sole discretion will determine what fixes, if any, will be provided. After a while, the LED indicator on the repeater double flashes, and the repeater is ready for a new The screen saver of the handset is designed to protect your LCD screen by filling it with an analogue

Repeater has the same radio coverage (up to 300m in unobstructed outdoor areas and up to 50m inside buildings) as the base station. Repeater does not increase the quantity of call paths. It shares the call paths with the base station. Adding a repeater is similar to adding a base station on the To achieve optimum performance for the repeater, it is important to find a good location. Below areRepeater mode extends the radio coverage of the base station. The repeater has the same radio coverage as the base station. This feature is especially useful for users who require mobility in large The changeable shortcuts are the two soft keys and four navigation keys. The available features that can be assigned to each key may vary. Before upgrading to the latest firmware you should read the related firmware notes and possibly consult with Yealink's support to ensure there are no compatibility issues or other potential conflicts. If such issues or conflicts do happen after an upgrade you may need to downgrade to a previous firmware version or perform a factory reset. The LCD screen displays the status information of the handset including the firmware version and model, hardware version, IPUI code, SN code and area. The DECT repeater has one LED indicator describing the repeater operations. The following table provides instructions on repeater operations and LED indications:

Restarting the base station is usually a safe and easy method to resolve functionality issues. However, you may want to consult your phone system administrator first to make sure the issues are not related to network problems or other external causes. Using this feature you can make internal calls to the other handsets that are registered under the same base station.

You can configure the time format of your device. The handset supports two time formats (12 Hour or 24 Hour). The handset provides you with 12 different input methods. You can disable the infrequently used input method. Then you can only switch among the enabled input methods when editing. Yealink IP DECT SIP-W52P is a SIP Cordless Phone that’s designed for small business users who are looking for immediate cost savings with scalability and efficiency. The high-quality TFT colour display provides a clear view from all angles and the high definition speaker phone ensures clear handsfree communication. supported by the base station in the extended radio range. The repeater, base station and cordless handset employ wireless connection. In this section we will describe the process to register/deregister a repeater to a base station and also some tips will be provided on how to deploy a repeater Ring tones are used to indicate incoming calls. You can set 9 different ring tones to distinguish the incoming line on your handset. You can also set a ring tone for an incoming intercom call. When receiving an incoming call, the handset rings the specified ring tone.

If the repeater is placed correctly (overlapping the coverage area of the base station), the handsets can move freely within the total coverage area while on a call. A dialog box pops up to prompt “Handset Firmware of the SIP DECT phone will be updated. It will take 5 minutes to complete. Please don't power off!”. Notification light is used to indicate voice mails and missed calls. When the handset receives a voice mail or misses a call, the message key LED flashes red. You can configure the notification light to indicate the voice mails or missed calls respectively. The redial number list stores the twenty last dialled phone numbers. When the memory of the redial number list is full, the handset will automatically erase the oldest dialled number when a new If you need help then our team are available from Monday to Thursday (between 9:00am and 5:30pm GMT) and on Friday (between 9:00am and 4:30pm GMT)repeater. If the call is successfully handled by the repeater, you can hear the verification tone from This user guide will help you to navigate and use your Yealink W52P. It will give you an overview of your handset, and walk you through tasks so you can successfully use your phone to perform basic and advanced functions. You can enable the keypad light to make the keypad light up when any key is pressed. This helps you distinguish keys from each other in a dark environment.